DRK208 Medical Mask Special Meltblown Material High Melt Flow Rate Tester

Nā mea ho'āʻo:No nā lāʻau lapaʻau a me ke olakino e like me nā maka lapaʻau, nā ʻaʻahu ʻokiʻoki, nā lole pale, etc.

ʻO DRK208 melt flow rate meter he mea hoʻāʻo no ka lāʻau lapaʻau a me nā mea palekana olakino e like me nā masks lapaʻau, nā lole ʻokiʻoki, nā lole pale, meltblown polypropylene a me ka polypropylene resin no nā lole anti-stick non-woven.

Kona mau koi:
√ Polypropylene no ka hehee
ʻAʻole pono ka nui o ka melt mass flow rate (MFR) ma mua o 1500 g/10min
√ Polypropylene resin no ka lole spunbond nonwoven:
ʻAʻole pono ka nui o ka melt mass flow rate (MFR) ma mua o 1500 g/10min
Kūlana hoʻokō:
Hoʻokō ka mea hana i nā koi o GB3682, ISO1133, ASTMD1238, ASTMD3364, DIN53735, UNI-5640, JJGB78-94 a me nā kūlana ʻē aʻe, a ua hana ʻia e like me JB / T5456 "Nā Kūlana Kūlana no ka Melt Flow Rate Apparatus".

Nā hiʻohiʻona:
ʻAno hōʻike/mana: ʻano micro-control
PID hoʻomalu wela aunoa; ʻoki lima/akomi; ka hoʻoneʻe ʻana i ka encoder; mana manawa/kūlana ho'āʻo 'akomi; ke kaupaona lima; hoʻouka wikiwiki; hoʻāʻo paʻi; hōʻike hopena (MFR, MVR, melt density).
kaʻina hana ʻenehana:
Ana ana: 0.01-1500.00 g/10min mass flow rate (MFR)
0.01-1500.00 knm3/10min ka nui kahe kahe (MVR)
0.001-9.999 g/cm3 hehee ka nui
Ka mana o ka wela: 50-400 ℃
Pono ka hoʻomalu ʻana i ka wela: 0.1 ℃, hōʻike pololei: 0.01 ℃
Barela: loko anawaena 9.55±0.025mm, lōʻihi 160 mm
Piston: poʻo anawaena 9.475±0.01 mm, nuipa 106g
Make: i loko anawaena 2.095 mm, lōʻihi 8±0.025 mm
Haawe helu: 0.325㎏, 1.2㎏, 2.16㎏, 3.8㎏, 5.0㎏, 10.0㎏, 21.6kg
Pono: 0.5%
Ka laulā ana o ka neʻe ʻana: 0 ~ 30mm, pololei ± 0.05mm
Ka mana lako uila: 220V±10% 50HZ
Ka mana hoʻomehana: 550W
Nā ana holoʻokoʻa o ka mea kani (lōʻihi×ākea×kiʻekiʻe): 560×376×530mm

Nānā: Ma muli o ka holomua ʻenehana, e hoʻololi ʻia ka ʻike me ka ʻole o ka hoʻolaha. Aia ka huahana i ka huahana maoli i ka wā ma hope.